ROBERTS SURFBOARDS : DREAM MAKER

SURFBOARDS > DREAM MAKER

DREAM MAKER

DESCRIPTION

The Dream Maker is a magic design with the unbelievable powers of speed and maneuverability in small surf. From the Dreamcatcher, we kept its rockers, forward surface area, and thickness flow so that the Dream Maker catches waves just as easily and has plenty of glide. Additional width to the outline gives it flow and acceleration in small or flat faced waves. The Dream Maker has a single to double concave bottom for control and lift with some added vee in the last few inches of the tail. The vee gives the board more release off the tail while thinning the squash tail corners for extra holding power. By going with a squash tail, it gives the board more planning surface in the back for more sustained speed and glide in smaller softer surf.

FEATURES

ROCKER

Moderate rocker with a small amount of flip in the nose allows it to go really fast and avoid pearling on the drops. The rocker flows through the board from nose to tail so it can cruise while having tons of speed without working too hard for it.

RAILS

Medium to slightly full for stability and float, with tucked hard edges for speed and holding power.

BOTTOM

Single to double concave with added vee in the last few inches of the tail

FINS

Five fin is standard to ride as a thruster or quad

WAVE TYPE

Knee high to a couple feet over head

SIZE GUIDE

Standard Sizes

Surfers weight (lbs)
according to ability

DREAM MAKER	Ltr	Adv	Inter	Novice
5’4 x 18 7/8 x 2 1/4	25.40	155	135	110
5’5 x 19 x 2 1/4	26.30	160	140	115
5’6 x 19 1/8 x 2 5/16	27.50	170	145	120
5’7 x 19 5/16 x 2 3/8	28.70	175	150	125
5’8 x 19 1/2 x 2 3/8	29.76	180	155	130
5’9 x 19 11/16 x 2 7/16	31.36	190	165	140
5’10 x 19 7/8 x 2 1/2	32.50	200	170	145
5’11 x 20 1/8 x 2 9/16	34.50	210	180	150
6’0 x 20 3/8 x 2 5/8	36.26	220	190	160
6’1 x 20 5/8 x 2 11/16	38.00	230	200	165
6’2 x 20 7/8 x 2 3/4	40.00	245	210	175
6’3 x 21 1/4 x 2 13/16	42.00	255	220	185
6’4 x 21 5/8 x 2 7/8	44.20	270	230	195
6’5 x 22 x 2 15/16	46.50	285	245	205
6’6 x 22 1/8 x 3	48.40	295	255	215

For sizes larger than 6'6, check out the Dream Maker Plus.

HOW TO SIZE THIS BOARD

Compared to a Dreamcatcher go 1” shorter and 3/8” wider in the same thickness. Sized from a WD, WD2 or similar ride in the same length. Use the same thickness and volume or slightly more for even easier wave catching ability. For width go up to 1/8" narrower to add sensitivity. Comparing to a pro model shortboard go 2-5" shorter, up to 7/8" wider and same to 1/16 thicker for a slightly higher volume. For a high performance approach based on your height, aim for about the same length to as much as 4” shorter as you are tall, matching volume to skill level, needs, or preferences. Up in volume and at your height or beyond for additional stability and wave catching ease. Custom dims are always available to match your needs or preferences. Please feel free to use our BOARD SIZING QUESTIONNAIRE to receive more info about our boards and sizing.